Aronga
Tauwhāiti
BR320D10
BR320D10 Mōhiohio Taketake
| Tauira tauira | BR320D10 |
|---|---|
| Pae Waitohu | BERISE |
| Tuhinga | a-Si TFT-LCD ,31.5 inch, 1366×768 |
| Momo Raraunga | a-Si TFT-LCD |
| BR320D10 Utu | Tono Tono me te Waa Whakahaere |
| Ingoa Brand | |
| Ingoa tauira | BR320D10 |
| Aratau Tauira | - |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
BR320D10 Ngā Hangarau Hangarau
| Ingoa Brand | |
|---|---|
| Ingoa tauira | BR320D10 |
| Aratau Tauira | - |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Tau Pika | 1366(RGB)×768, WXGA |
| Hōputu Pika | RGB Vertical Stripe |
| Poutoro Poto (H × V) | 0.17025×0.51075 mm |
| Pihanga Pitch (H × V) | 0.51075×0.51075 mm |
| Whakaaturanga Area (H × V) | 697.685×392.256 mm |
| Bezel Whakatuwhera (H × V) | 703.8×398.4 mm |
| Whakakitenga Whānui (H × V) | 760×450 mm |
| Te Taha Whānui | 48.0 (Typ.) mm |
| Hanga Hanga | - |
| Whakaaro Ratio (H: V) | 16:9 |
| Whakatakotoranga | Landscape type |
| Mass | - |
| Ko te Tae Rangahau | - |
| Maimoatanga Mata | Antiglare (Haze 13%), Hard coating (3H) |
| Horo me nga Poaka | Face mounting holes (9-Φ5.0); Side mounting holes (5-M4); Rear mounting holes (8-M4) |
BR320D10 Ngā Āhuahira Arotahi
| Ingoa Brand | |
|---|---|
| Ingoa tauira | BR320D10 |
| Aratau Tauira | - |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Tau Pika | 1366(RGB)×768, WXGA |
| Hōputu Pika | RGB Vertical Stripe |
| Poutoro Poto (H × V) | 0.17025×0.51075 mm |
| Pihanga Pitch (H × V) | 0.51075×0.51075 mm |
| Whakaaturanga Area (H × V) | 697.685×392.256 mm |
| Bezel Whakatuwhera (H × V) | 703.8×398.4 mm |
| Whakakitenga Whānui (H × V) | 760×450 mm |
| Te Taha Whānui | 48.0 (Typ.) mm |
| Hanga Hanga | - |
| Whakaaro Ratio (H: V) | 16:9 |
| Whakatakotoranga | Landscape type |
| Mass | - |
| Ko te Tae Rangahau | - |
| Maimoatanga Mata | Antiglare (Haze 13%), Hard coating (3H) |
| Horo me nga Poaka | Face mounting holes (9-Φ5.0); Side mounting holes (5-M4); Rear mounting holes (8-M4) |
| Te whakamarama | 1000 cd/m² (Typ.) |
| Mahinga Mahi | S-IPS, Normally Black, Transmissive |
| Whakatau Ratonga | 1100:1 (Typ.) (Transmissive) |
| Taonga | 72% NTSC (CIE1931) |
| Tae Tautoko | 16.7M (8-bit) |
| Whakaaetanga Tae | Wx:0.279; Wy:0.292 |
| Hangarau Hangarau | - |
| Te Tirohanga O waho | Sunlight Readable |
| Whakaaro | - |
| White Uniformity | 1.30 (Max.)(5 points) Performance : 3D Technology |
BR320D10 Hangarau Hangarau
| Ingoa Brand | |
|---|---|
| Ingoa tauira | BR320D10 |
| Aratau Tauira | - |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Tau Pika | 1366(RGB)×768, WXGA |
| Hōputu Pika | RGB Vertical Stripe |
| Poutoro Poto (H × V) | 0.17025×0.51075 mm |
| Pihanga Pitch (H × V) | 0.51075×0.51075 mm |
| Whakaaturanga Area (H × V) | 697.685×392.256 mm |
| Bezel Whakatuwhera (H × V) | 703.8×398.4 mm |
| Whakakitenga Whānui (H × V) | 760×450 mm |
| Te Taha Whānui | 48.0 (Typ.) mm |
| Hanga Hanga | - |
| Whakaaro Ratio (H: V) | 16:9 |
| Whakatakotoranga | Landscape type |
| Mass | - |
| Ko te Tae Rangahau | - |
| Maimoatanga Mata | Antiglare (Haze 13%), Hard coating (3H) |
| Horo me nga Poaka | Face mounting holes (9-Φ5.0); Side mounting holes (5-M4); Rear mounting holes (8-M4) |
| Te whakamarama | 1000 cd/m² (Typ.) |
| Mahinga Mahi | S-IPS, Normally Black, Transmissive |
| Whakatau Ratonga | 1100:1 (Typ.) (Transmissive) |
| Taonga | 72% NTSC (CIE1931) |
| Tae Tautoko | 16.7M (8-bit) |
| Whakaaetanga Tae | Wx:0.279; Wy:0.292 |
| Hangarau Hangarau | - |
| Te Tirohanga O waho | Sunlight Readable |
| Whakaaro | - |
| White Uniformity | 1.30 (Max.)(5 points) Performance : 3D Technology |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Te Whakamahinga Mana Utu | 87.5W (Typ.) |
BR320D10 Pūnaha Ataata
| Ingoa Brand | YEONHO |
|---|---|
| Ingoa tauira | BR320D10 |
| Aratau Tauira | - |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Tau Pika | 1366(RGB)×768, WXGA |
| Hōputu Pika | RGB Vertical Stripe |
| Poutoro Poto (H × V) | 0.17025×0.51075 mm |
| Pihanga Pitch (H × V) | 0.51075×0.51075 mm |
| Whakaaturanga Area (H × V) | 697.685×392.256 mm |
| Bezel Whakatuwhera (H × V) | 703.8×398.4 mm |
| Whakakitenga Whānui (H × V) | 760×450 mm |
| Te Taha Whānui | 48.0 (Typ.) mm |
| Hanga Hanga | - |
| Whakaaro Ratio (H: V) | 16:9 |
| Whakatakotoranga | Landscape type |
| Mass | - |
| Ko te Tae Rangahau | - |
| Maimoatanga Mata | Antiglare (Haze 13%), Hard coating (3H) |
| Horo me nga Poaka | Face mounting holes (9-Φ5.0); Side mounting holes (5-M4); Rear mounting holes (8-M4) |
| Te whakamarama | 1000 cd/m² (Typ.) |
| Mahinga Mahi | S-IPS, Normally Black, Transmissive |
| Whakatau Ratonga | 1100:1 (Typ.) (Transmissive) |
| Taonga | 72% NTSC (CIE1931) |
| Tae Tautoko | 16.7M (8-bit) |
| Whakaaetanga Tae | Wx:0.279; Wy:0.292 |
| Hangarau Hangarau | - |
| Te Tirohanga O waho | Sunlight Readable |
| Whakaaro | - |
| White Uniformity | 1.30 (Max.)(5 points) Performance : 3D Technology |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Te Whakamahinga Mana Utu | 87.5W (Typ.) |
| Tūnga | Direct light type |
| Te ora (haora) | - |
| Te nui | 1 pcs |
| Hanga | - |
| Te whakakapi | - |
| Aratau WLED Driver State | With LED Driver |
| Momo Momo | Connector |
| Waehere Atanga | - |
| Tohu | 14 pins |
| Pihanga Whakawhiti | 2.0 mm |
| Pin Whirihoranga H: Higt VoltageN: Kore honongaL: Low VoltageA: AnodeC: Cathode "/> | |
| Putanga Whakauru | 24.0V (Typ.) |
| Kei te Input o Naianei | - |
| Whakaoranga Mana | - |
BR320D10 Atanga Waitohu
| Ingoa Brand | JAE |
|---|---|
| Ingoa tauira | BR320D10 |
| Aratau Tauira | - |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Tau Pika | 1366(RGB)×768, WXGA |
| Hōputu Pika | RGB Vertical Stripe |
| Poutoro Poto (H × V) | 0.17025×0.51075 mm |
| Pihanga Pitch (H × V) | 0.51075×0.51075 mm |
| Whakaaturanga Area (H × V) | 697.685×392.256 mm |
| Bezel Whakatuwhera (H × V) | 703.8×398.4 mm |
| Whakakitenga Whānui (H × V) | 760×450 mm |
| Te Taha Whānui | 48.0 (Typ.) mm |
| Hanga Hanga | - |
| Whakaaro Ratio (H: V) | 16:9 |
| Whakatakotoranga | Landscape type |
| Mass | - |
| Ko te Tae Rangahau | - |
| Maimoatanga Mata | Antiglare (Haze 13%), Hard coating (3H) |
| Horo me nga Poaka | Face mounting holes (9-Φ5.0); Side mounting holes (5-M4); Rear mounting holes (8-M4) |
| Te whakamarama | 1000 cd/m² (Typ.) |
| Mahinga Mahi | S-IPS, Normally Black, Transmissive |
| Whakatau Ratonga | 1100:1 (Typ.) (Transmissive) |
| Taonga | 72% NTSC (CIE1931) |
| Tae Tautoko | 16.7M (8-bit) |
| Whakaaetanga Tae | Wx:0.279; Wy:0.292 |
| Hangarau Hangarau | - |
| Te Tirohanga O waho | Sunlight Readable |
| Whakaaro | - |
| White Uniformity | 1.30 (Max.)(5 points) Performance : 3D Technology |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Te Whakamahinga Mana Utu | 87.5W (Typ.) |
| Tūnga | Direct light type |
| Te ora (haora) | - |
| Te nui | 1 pcs |
| Hanga | - |
| Te whakakapi | - |
| Aratau WLED Driver State | With LED Driver |
| Momo Momo | Connector |
| Waehere Atanga | - |
| Tohu | 30 pins |
| Pihanga Whakawhiti | 1.0 mm |
| Pin Whirihoranga H: Higt VoltageN: Kore honongaL: Low VoltageA: AnodeC: Cathode "/> | |
| Putanga Whakauru | 12.0V (Typ.) |
| Kei te Input o Naianei | 295/384mA (Typ./Max.) |
| Whakaoranga Mana | 3.5/4.6W (Typ./Max.) |
| Momo Waitohu | LVDS (1 ch, 8-bit) |
| Pin Whirihoranga | LVDS-30P1C8B-015F |