Aronga
Tauwhāiti
CLAA123FCA3 XN
CLAA123FCA3 XN Mōhiohio Taketake
| Tauira tauira | CLAA123FCA3 XN |
|---|---|
| Pae Waitohu | CPT |
| Tuhinga | a-Si TFT-LCD ,12.3 inch, 1920×720 |
| Momo Raraunga | a-Si TFT-LCD |
| CLAA123FCA3 XN Utu | Tono Tono me te Waa Whakahaere |
| Aratau Tauira | - |
| Tae Mahi | -30 ~ 85 °C |
| Haumaru Ruinga | -40 ~ 95 °C |
| Whakaaho Whakamene | 2.9G (28.4 m/s²) |
| Ngā Āhuatanga Whaiaro |
CLAA123FCA3 XN Ngā Hangarau Hangarau
| Aratau Tauira | - |
|---|---|
| Tae Mahi | -30 ~ 85 °C |
| Haumaru Ruinga | -40 ~ 95 °C |
| Whakaaho Whakamene | 2.9G (28.4 m/s²) |
| Ngā Āhuatanga Whaiaro | |
| Te whakatau | 1920(RGB)×720 |
| Whakaritenga Pika | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.0507×0.1521 mm |
| Pihanga Pitch (W × H) | 0.1521×0.1521 mm |
| Area Mahi (W × H) | 292.032×109.512 mm |
| Bezel Area (W × H) | 294×112.4 mm |
| Mahinga Whakahuahua (W × H) | 313.8×132.2 mm |
| Whakaaturanga Whakahuahua | 7/12.9 (Typ./Max.) mm |
| Puka Puka | Flat Rectangle |
| Whakaaro Ratonga | 8:3 (W : H) |
| Whakatakotoranga | Landscape type |
| Hanga Hanga | - |
| Ko te Tae Rangahau | - |
| Taumaha | 540g |
| Mata | Antiglare |
| Whakatika | Rear mounting Pole |
CLAA123FCA3 XN Ngā Āhuahira Arotahi
| Aratau Tauira | - |
|---|---|
| Tae Mahi | -30 ~ 85 °C |
| Haumaru Ruinga | -40 ~ 95 °C |
| Whakaaho Whakamene | 2.9G (28.4 m/s²) |
| Ngā Āhuatanga Whaiaro | |
| Te whakatau | 1920(RGB)×720 |
| Whakaritenga Pika | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.0507×0.1521 mm |
| Pihanga Pitch (W × H) | 0.1521×0.1521 mm |
| Area Mahi (W × H) | 292.032×109.512 mm |
| Bezel Area (W × H) | 294×112.4 mm |
| Mahinga Whakahuahua (W × H) | 313.8×132.2 mm |
| Whakaaturanga Whakahuahua | 7/12.9 (Typ./Max.) mm |
| Puka Puka | Flat Rectangle |
| Whakaaro Ratonga | 8:3 (W : H) |
| Whakatakotoranga | Landscape type |
| Hanga Hanga | - |
| Ko te Tae Rangahau | - |
| Taumaha | 540g |
| Mata | Antiglare |
| Whakatika | Rear mounting Pole |
| Maama | 700 cd/m² (Typ.) |
| Aratau Mahi | HFFS, Normally Black, Transmissive |
| Whakatau Ratonga | 1000:1 (Typ.) (Transmissive) |
| Tae Tae | 16.7M (8-bit) |
| Te tae matomato Kakano | Wx:0.267; Wy:0.271 |
| Patohi 3D | - |
| Te Tirohanga O waho | Sunlight Readable |
| Whakaaro | - |
| Whakaaro Whakamoemiti | 1.25/1.33 (Typ./Max.)(9 points) Performance : 3D Type |
CLAA123FCA3 XN Hangarau Hangarau
| Aratau Tauira | - |
|---|---|
| Tae Mahi | -30 ~ 85 °C |
| Haumaru Ruinga | -40 ~ 95 °C |
| Whakaaho Whakamene | 2.9G (28.4 m/s²) |
| Ngā Āhuatanga Whaiaro | |
| Te whakatau | 1920(RGB)×720 |
| Whakaritenga Pika | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.0507×0.1521 mm |
| Pihanga Pitch (W × H) | 0.1521×0.1521 mm |
| Area Mahi (W × H) | 292.032×109.512 mm |
| Bezel Area (W × H) | 294×112.4 mm |
| Mahinga Whakahuahua (W × H) | 313.8×132.2 mm |
| Whakaaturanga Whakahuahua | 7/12.9 (Typ./Max.) mm |
| Puka Puka | Flat Rectangle |
| Whakaaro Ratonga | 8:3 (W : H) |
| Whakatakotoranga | Landscape type |
| Hanga Hanga | - |
| Ko te Tae Rangahau | - |
| Taumaha | 540g |
| Mata | Antiglare |
| Whakatika | Rear mounting Pole |
| Maama | 700 cd/m² (Typ.) |
| Aratau Mahi | HFFS, Normally Black, Transmissive |
| Whakatau Ratonga | 1000:1 (Typ.) (Transmissive) |
| Tae Tae | 16.7M (8-bit) |
| Te tae matomato Kakano | Wx:0.267; Wy:0.271 |
| Patohi 3D | - |
| Te Tirohanga O waho | Sunlight Readable |
| Whakaaro | - |
| Whakaaro Whakamoemiti | 1.25/1.33 (Typ./Max.)(9 points) Performance : 3D Type |
| Whakaoranga Mana Whakahaere | 10.01W (Typ.) |
| Tae Whakatau | 60Hz |
| Whakaaro Whakamuri | Yes (U/D, L/R) |
CLAA123FCA3 XN Atanga Waitohu
| Aratau Tauira | - |
|---|---|
| Tae Mahi | -30 ~ 85 °C |
| Haumaru Ruinga | -40 ~ 95 °C |
| Whakaaho Whakamene | 2.9G (28.4 m/s²) |
| Ngā Āhuatanga Whaiaro | |
| Te whakatau | 1920(RGB)×720 |
| Whakaritenga Pika | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.0507×0.1521 mm |
| Pihanga Pitch (W × H) | 0.1521×0.1521 mm |
| Area Mahi (W × H) | 292.032×109.512 mm |
| Bezel Area (W × H) | 294×112.4 mm |
| Mahinga Whakahuahua (W × H) | 313.8×132.2 mm |
| Whakaaturanga Whakahuahua | 7/12.9 (Typ./Max.) mm |
| Puka Puka | Flat Rectangle |
| Whakaaro Ratonga | 8:3 (W : H) |
| Whakatakotoranga | Landscape type |
| Hanga Hanga | - |
| Ko te Tae Rangahau | - |
| Taumaha | 540g |
| Mata | Antiglare |
| Whakatika | Rear mounting Pole |
| Maama | 700 cd/m² (Typ.) |
| Aratau Mahi | HFFS, Normally Black, Transmissive |
| Whakatau Ratonga | 1000:1 (Typ.) (Transmissive) |
| Tae Tae | 16.7M (8-bit) |
| Te tae matomato Kakano | Wx:0.267; Wy:0.271 |
| Patohi 3D | - |
| Te Tirohanga O waho | Sunlight Readable |
| Whakaaro | - |
| Whakaaro Whakamoemiti | 1.25/1.33 (Typ./Max.)(9 points) Performance : 3D Type |
| Whakaoranga Mana Whakahaere | 10.01W (Typ.) |
| Tae Whakatau | 60Hz |
| Whakaaro Whakamuri | Yes (U/D, L/R) |
| Whakauru o Naianei | 600/950mA (Typ./Max.) |
| Input Pūhiko | 3.3V (Typ.) |
| Te kai | 1.98W (Typ.) |
| Tūnga | |
| Atanga | LVDS (2 ch, 8-bit) |
| Te nui | 1 pcs |
| Pihanga Whakawhiti | 0.5 mm |
| Tohu | 40 pins |
| Waitohu Tohu |
CLAA123FCA3 XN Pūnaha Ataata
| Aratau Tauira | - |
|---|---|
| Tae Mahi | -30 ~ 85 °C |
| Haumaru Ruinga | -40 ~ 95 °C |
| Whakaaho Whakamene | 2.9G (28.4 m/s²) |
| Ngā Āhuatanga Whaiaro | |
| Te whakatau | 1920(RGB)×720 |
| Whakaritenga Pika | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.0507×0.1521 mm |
| Pihanga Pitch (W × H) | 0.1521×0.1521 mm |
| Area Mahi (W × H) | 292.032×109.512 mm |
| Bezel Area (W × H) | 294×112.4 mm |
| Mahinga Whakahuahua (W × H) | 313.8×132.2 mm |
| Whakaaturanga Whakahuahua | 7/12.9 (Typ./Max.) mm |
| Puka Puka | Flat Rectangle |
| Whakaaro Ratonga | 8:3 (W : H) |
| Whakatakotoranga | Landscape type |
| Hanga Hanga | - |
| Ko te Tae Rangahau | - |
| Taumaha | 540g |
| Mata | Antiglare |
| Whakatika | Rear mounting Pole |
| Maama | 700 cd/m² (Typ.) |
| Aratau Mahi | HFFS, Normally Black, Transmissive |
| Whakatau Ratonga | 1000:1 (Typ.) (Transmissive) |
| Tae Tae | 16.7M (8-bit) |
| Te tae matomato Kakano | Wx:0.267; Wy:0.271 |
| Patohi 3D | - |
| Te Tirohanga O waho | Sunlight Readable |
| Whakaaro | - |
| Whakaaro Whakamoemiti | 1.25/1.33 (Typ./Max.)(9 points) Performance : 3D Type |
| Whakaoranga Mana Whakahaere | 10.01W (Typ.) |
| Tae Whakatau | 60Hz |
| Whakaaro Whakamuri | Yes (U/D, L/R) |
| Whakauru o Naianei | 108mA (Typ.) |
| Input Pūhiko | 18.6/20.4V (Min./Max.) |
| Te kai | 8.03W (Typ.) |
| Tūnga | - |
| Atanga | LVDS (2 ch, 8-bit) |
| Te nui | 6S4P |
| Pihanga Whakawhiti | 0.5 mm |
| Tohu | 10 pins |
| Waitohu Tohu | |
| Hanga | 4 strings |
| Te ora (haora) | 50K(Min.) |
| Te whakakapi | - |
| WLED Driver | No |
| Pin Tohu H: Higt VoltageN: Kore honongaL: Low VoltageA: AnodeC: Cathode "/> |