Aronga
Tauwhāiti
CLAT080WQ65
CLAT080WQ65 Mōhiohio Taketake
| Tauira tauira | CLAT080WQ65 |
|---|---|
| Pae Waitohu | CPT |
| Tuhinga | a-Si TFT-LCD ,8.0 inch, 800×1280 |
| Momo Raraunga | a-Si TFT-LCD |
| CLAT080WQ65 Utu | Tono Tono me te Waa Whakahaere |
| Tae Mahi | -20 ~ 70 °C |
| Haumaru Ruinga | -30 ~ 80 °C |
CLAT080WQ65 Ngā Hangarau Hangarau
| Whakatau Whakamutunga | 800(RGB)×1280 (WXGA) |
|---|---|
| Pihikete Pika | RGB Vertical Stripe |
| Pihanga Pika | 188 PPI |
| Whakaaro Ratonga | 10:16 (H:V) |
| Factor Puka | Flat Rectangle Display |
| Poutoro Poto | 0.04485×0.13455 mm (H×V) |
| Pika Pihanga | 0.13455×0.13455 mm (H×V) |
| Taumaha | TBD |
| Mata | Hard coating (3H) |
| Area Mahinga | 107.64×172.224 mm (H×V) |
| Bezel Area | 108.64×173.22 mm (H×V) |
| Rautaki Whakahuahua | 119.6×205.4 mm (H×V) |
| Whakaaturanga Whakahuahua | 3.25/4.9 (Typ./Max.) mm |
| Nga Whenua Whenua ranei | Portrait type |
| Pae Tae | Embeded (Projected Capacitive Touch) |
| Ko te Tae Rangahau | With Cover Lens |
CLAT080WQ65 Ngā Āhuahira Arotahi
| Whakaatu Aratau | FFS, Normally Black, Transmissive |
|---|---|
| Maama | 360 cd/m² (Typ.) |
| Whakatau Ratonga | 1000 : 1 (Typ.) (Transmissive) |
| Whakaatu Tae | 16.7M (8-bit) |
| Tae Tae | 52% NTSC (CIE1931) |
| Wā Whakautu | 30 (Typ.)(Tr+Td) |
| Tirohia te Angle | 85/85/85/85 (Typ.)(CR≥10) (L/R/U/D) |
| Tirohanga Whakahaere | Symmetry |
| Te tae matomato Kakano | Wx:0.305; Wy:0.320 |
| Te Maama White | 1.25/1.43 (Max.)(9/13 points) |
| Maama te Maama | N |
CLAT080WQ65 Hangarau Hangarau
| Putanga Poutū | 60Hz |
|---|---|
| Whakaaro Whakamuri | No |
| Driver IC | COG Built-in ILI6136S |
CLAT080WQ65 Pūnaha Ataata
| Tumuaki Poko | Edge light type |
|---|---|
| Momo Momo | WLED |
| He nui te raima | 4S5P |
| Hanga Hangaira | 5 strings |
| Te wa mo te rama | 15K(Min.) (Hours) |
| Penehi Rama | 10.8/12.0V (Typ./Max.) |
| Rama i teianei | 20mA (Typ.) |
| Whakaoho Whakaoho Rama | 1.2W (Max.) |
| Momo Atanga | Included in panel signal interface |
| Papa Pouaka Papa | No |
CLAT080WQ65 Atanga Waitohu
| Waitohu Waitohu | MIPI |
|---|---|
| Pato Waitohu | MIPI (4 data lanes) |
| Putanga o te Whakauru mo te Paewhiri | 1.8/3.3/16.5/-11V (Typ.)(VCI/VDD3/VGH/VGL) |
| Whakaoranga Mana Whakahaere | 170/350mW (Typ./Max.) |
| Momo Atanga | Connector |
| Atanga Waitohu | I-PEX - 20613-039E-01, Pitch:0.3 mm, Pin:39 pins |