Aronga
Tauwhāiti
HSD121PHW1-B00
HSD121PHW1-B00 Mōhiohio Taketake
| Tauira tauira | HSD121PHW1-B00 |
|---|---|
| Pae Waitohu | HannStar |
| Tuhinga | a-Si TFT-LCD ,12.1 inch, 1366×768 |
| Momo Raraunga | a-Si TFT-LCD |
| HSD121PHW1-B00 Utu | Tono Tono me te Waa Whakahaere |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Nga korero | Right side connector (rear view) |
HSD121PHW1-B00 Ngā Hangarau Hangarau
| Whakatau Whakamutunga | 1366(RGB)×768 (WXGA) |
|---|---|
| Pihikete Pika | RGB Vertical Stripe |
| Pihanga Pika | 129 PPI |
| Whakaaro Ratonga | 16:9 (H:V) |
| Factor Puka | Flat Rectangle Display |
| Poutoro Poto | 0.0654×0.1962 mm (H×V) |
| Pika Pihanga | 0.1962×0.1962 mm (H×V) |
| Taumaha | 250/265g (Typ./Max.) |
| Mata | Antiglare, Hard coating (3H) |
| Area Mahinga | 268.01×150.68 mm (H×V) |
| Bezel Area | 271.01×153.48 mm (H×V) |
| Rautaki Whakahuahua | 279×167.2 mm (H×V) |
| Whakaaturanga Whakahuahua | 5.1 (Max.) mm |
| Hanga Hanga | Wedge (PCBA Bent, Depth ≥5.2mm) |
| Horo me nga Poaka | Side mounting holes (4-M2) on left, right bezel |
| Nga Whenua Whenua ranei | Landscape type |
| Pae Tae | Without |
HSD121PHW1-B00 Ngā Āhuahira Arotahi
| Whakaatu Aratau | TN, Normally White, Transmissive |
|---|---|
| Maama | 250 cd/m² (Typ.) |
| Whakatau Ratonga | 500 : 1 (Typ.) (Transmissive) |
| Whakaatu Tae | 262K (6-bit) |
| Tae Tae | 50% NTSC (CIE1931) |
| Wā Whakautu | 3/9 (Typ.)(Tr/Td) |
| Tirohia te Angle | 80/80/70/80 (Typ.)(CR≥10) (L/R/U/D) |
| Te tae matomato Kakano | Wx:0.313; Wy:0.329 |
| Te Maama White | 1.25/1.43 (Max.)(5/13 points) |
| Maama te Maama | N |
HSD121PHW1-B00 Hangarau Hangarau
| Putanga Poutū | 60Hz |
|---|---|
| Whakaaro Whakamuri | No |
HSD121PHW1-B00 Pūnaha Ataata
| Tumuaki Poko | Edge light type |
|---|---|
| Momo Momo | WLED |
| Te wa mo te rama | 10K(Min.) (Hours) |
| Whakaoho Whakaoho Rama | 1.92/2.1W (Typ./Max.) |
| Momo Atanga | Included in panel signal interface |
| Papa Pouaka Papa | 7.0/21.0V (Min./Max.) |
HSD121PHW1-B00 Atanga Waitohu
| Waitohu Waitohu | LVDS |
|---|---|
| Pato Waitohu | LVDS (1 ch, 6-bit) |
| Putanga o te Whakauru mo te Paewhiri | 3.3V (Typ.) |
| Te Whakauru Naianei mo te Paewhiri | 0.3A (Typ.) |
| Whakaoranga Mana Whakahaere | 0.95W (Typ.) |
| Momo Atanga | Connector |
| Atanga Waitohu | JAE - FI-XB30SL-HF10, Pitch:1.0 mm, Pin:30 pins |