Aronga
Tauwhāiti
LM156LF1L03
LM156LF1L03 Mōhiohio Taketake
| Tauira tauira | LM156LF1L03 |
|---|---|
| Pae Waitohu | PANDA |
| Tuhinga | IGZO TFT-LCD ,15.6 inch, 1920×1080 |
| Momo Raraunga | IGZO TFT-LCD |
| LM156LF1L03 Utu | Tono Tono me te Waa Whakahaere |
| Tetahi Ingoa | NCP001C |
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
LM156LF1L03 Ngā Āhuahira Arotahi
| Tetahi Ingoa | NCP001C |
|---|---|
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
| Te whakamarama | 250 cd/m² (Typ.) |
| Whakatau Ratonga | 1000:1 (Typ.) (Transmissive) |
| Tuhinga pai i | Symmetry |
| Whakautu Tere | 25 (Typ.)(Tr+Tf) ms |
| Tirohia te Angle | 85/85/85/85 (Typ.)(CR≥10) |
| Aratau Mahi | FFS, Normally Black, Transmissive |
| Tuhinga o mua | Wx:0.313; Wy:0.329 |
| Tae Tautoko | 262K (6-bit) |
| Taonga | 45% NTSC (CIE1931) |
| Te Maama White | 1.25/1.5 (Typ./Max.)(13 points) |
LM156LF1L03 Ngā Hangarau Hangarau
| Tetahi Ingoa | NCP001C |
|---|---|
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
| Te whakamarama | 250 cd/m² (Typ.) |
| Whakatau Ratonga | 1000:1 (Typ.) (Transmissive) |
| Tuhinga pai i | Symmetry |
| Whakautu Tere | 25 (Typ.)(Tr+Tf) ms |
| Tirohia te Angle | 85/85/85/85 (Typ.)(CR≥10) |
| Aratau Mahi | FFS, Normally Black, Transmissive |
| Tuhinga o mua | Wx:0.313; Wy:0.329 |
| Tae Tautoko | 262K (6-bit) |
| Taonga | 45% NTSC (CIE1931) |
| Te Maama White | 1.25/1.5 (Typ./Max.)(13 points) |
| Tau o nga Pika | 1920(RGB)×1080, FHD |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.05975×0.17925 mm |
| Pihanga Pitch (W × H) | 0.17925×0.17925 mm |
| Tirohanga Mahinga | 344.16(W)×193.59(H) mm |
| Whakakototanga Dim. | 359.5(W)×223.8(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 3.2 (Max.) mm |
| Hanga Hanga | Slim (PCBA Flat, Depth ≤3.2mm) |
| Whakatakotoranga | Landscape type |
| Ratio Whakaaro (W: H) | 16:9 |
| Whakatika | Face mounting holes (8 pcs) on up, down slugs |
| Mass | 345g (Max.) |
| Mata | Antiglare, Hard coating (3H) |
LM156LF1L03 Hangarau Hangarau
| Tetahi Ingoa | NCP001C |
|---|---|
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
| Te whakamarama | 250 cd/m² (Typ.) |
| Whakatau Ratonga | 1000:1 (Typ.) (Transmissive) |
| Tuhinga pai i | Symmetry |
| Whakautu Tere | 25 (Typ.)(Tr+Tf) ms |
| Tirohia te Angle | 85/85/85/85 (Typ.)(CR≥10) |
| Aratau Mahi | FFS, Normally Black, Transmissive |
| Tuhinga o mua | Wx:0.313; Wy:0.329 |
| Tae Tautoko | 262K (6-bit) |
| Taonga | 45% NTSC (CIE1931) |
| Te Maama White | 1.25/1.5 (Typ./Max.)(13 points) |
| Tau o nga Pika | 1920(RGB)×1080, FHD |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.05975×0.17925 mm |
| Pihanga Pitch (W × H) | 0.17925×0.17925 mm |
| Tirohanga Mahinga | 344.16(W)×193.59(H) mm |
| Whakakototanga Dim. | 359.5(W)×223.8(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 3.2 (Max.) mm |
| Hanga Hanga | Slim (PCBA Flat, Depth ≤3.2mm) |
| Whakatakotoranga | Landscape type |
| Ratio Whakaaro (W: H) | 16:9 |
| Whakatika | Face mounting holes (8 pcs) on up, down slugs |
| Mass | 345g (Max.) |
| Mata | Antiglare, Hard coating (3H) |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Te Whakataunga Moni | 3.01W (Typ.) |
LM156LF1L03 Atanga Waitohu
| Tetahi Ingoa | NCP001C |
|---|---|
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
| Te whakamarama | 250 cd/m² (Typ.) |
| Whakatau Ratonga | 1000:1 (Typ.) (Transmissive) |
| Tuhinga pai i | Symmetry |
| Whakautu Tere | 25 (Typ.)(Tr+Tf) ms |
| Tirohia te Angle | 85/85/85/85 (Typ.)(CR≥10) |
| Aratau Mahi | FFS, Normally Black, Transmissive |
| Tuhinga o mua | Wx:0.313; Wy:0.329 |
| Tae Tautoko | 262K (6-bit) |
| Taonga | 45% NTSC (CIE1931) |
| Te Maama White | 1.25/1.5 (Typ./Max.)(13 points) |
| Tau o nga Pika | 1920(RGB)×1080, FHD |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.05975×0.17925 mm |
| Pihanga Pitch (W × H) | 0.17925×0.17925 mm |
| Tirohanga Mahinga | 344.16(W)×193.59(H) mm |
| Whakakototanga Dim. | 359.5(W)×223.8(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 3.2 (Max.) mm |
| Hanga Hanga | Slim (PCBA Flat, Depth ≤3.2mm) |
| Whakatakotoranga | Landscape type |
| Ratio Whakaaro (W: H) | 16:9 |
| Whakatika | Face mounting holes (8 pcs) on up, down slugs |
| Mass | 345g (Max.) |
| Mata | Antiglare, Hard coating (3H) |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Te Whakataunga Moni | 3.01W (Typ.) |
| Kei te Input o Naianei | 180/290mA (Typ./Max.) |
| Putanga Whakauru | 3.3V (Typ.) |
| Te kai | 0.59W (Typ.) |
| Atanga Waitohu | eDP (2 Lanes) |
| Tūnga | |
| Momo Momo | Connector |
| Pihanga Whakawhiti | Pins |
| Te nui | Pin Assignment |
LM156LF1L03 Pūnaha Ataata
| Tetahi Ingoa | NCP001C |
|---|---|
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
| Te whakamarama | 250 cd/m² (Typ.) |
| Whakatau Ratonga | 1000:1 (Typ.) (Transmissive) |
| Tuhinga pai i | Symmetry |
| Whakautu Tere | 25 (Typ.)(Tr+Tf) ms |
| Tirohia te Angle | 85/85/85/85 (Typ.)(CR≥10) |
| Aratau Mahi | FFS, Normally Black, Transmissive |
| Tuhinga o mua | Wx:0.313; Wy:0.329 |
| Tae Tautoko | 262K (6-bit) |
| Taonga | 45% NTSC (CIE1931) |
| Te Maama White | 1.25/1.5 (Typ./Max.)(13 points) |
| Tau o nga Pika | 1920(RGB)×1080, FHD |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.05975×0.17925 mm |
| Pihanga Pitch (W × H) | 0.17925×0.17925 mm |
| Tirohanga Mahinga | 344.16(W)×193.59(H) mm |
| Whakakototanga Dim. | 359.5(W)×223.8(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 3.2 (Max.) mm |
| Hanga Hanga | Slim (PCBA Flat, Depth ≤3.2mm) |
| Whakatakotoranga | Landscape type |
| Ratio Whakaaro (W: H) | 16:9 |
| Whakatika | Face mounting holes (8 pcs) on up, down slugs |
| Mass | 345g (Max.) |
| Mata | Antiglare, Hard coating (3H) |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Te Whakataunga Moni | 3.01W (Typ.) |
| Kei te Input o Naianei | 202mA (Typ.) |
| Putanga Whakauru | 5.0/12.0/21.0V (Min./Typ./Max.) |
| Te kai | 2.42W (Typ.) |
| Atanga Waitohu | eDP (2 Lanes) |
| Tūnga | - |
| Momo Momo | WLED |
| Pihanga Whakawhiti | Pins |
| Te nui | - |
| Whakawhiti | - |
| Hanga Hangaira | - |
| Life Pamp | 10K(Typ.) (Hours) |
| Aratau Arataki | With LED Driver |