Aronga
Tauwhāiti
N116BGE-EB2
N116BGE-EB2 Mōhiohio Taketake
| Tauira tauira | N116BGE-EB2 |
|---|---|
| Pae Waitohu | INNOLUX |
| Tuhinga | a-Si TFT-LCD ,11.6 inch, 1366×768 |
| Momo Raraunga | a-Si TFT-LCD |
| N116BGE-EB2 Utu | Tono Tono me te Waa Whakahaere |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
N116BGE-EB2 Ngā Hangarau Hangarau
| Whakatau Whakamutunga | 1366(RGB)×768 (WXGA) |
|---|---|
| Pihikete Pika | RGB Vertical Stripe |
| Pihanga Pika | 135 PPI |
| Whakaaro Ratonga | 16:9 (H:V) |
| Factor Puka | Flat Rectangle Display |
| Poutoro Poto | 0.0625×0.1875 mm (H×V) |
| Pika Pihanga | 0.1875×0.1875 mm (H×V) |
| Taumaha | 200/210g (Typ./Max.) |
| Mata | Glare (Haze 0%), Hard coating (3H) |
| Area Mahinga | 256.125×144 mm (H×V) |
| Rautaki Whakahuahua | 268×157.5 mm (H×V) |
| Whakaaturanga Whakahuahua | 2.85/3.0 (Typ./Max.) mm |
| Hanga Hanga | Slim (PCBA Flat, Depth ≤3.2mm) |
| Horo me nga Poaka | Face mounting holes (8 pcs) on left, right slugs |
| Nga Whenua Whenua ranei | Landscape type |
| Pae Tae | Without |
N116BGE-EB2 Ngā Āhuahira Arotahi
| Whakaatu Aratau | TN, Normally White, Transmissive |
|---|---|
| Maama | 220 cd/m² (Typ.) |
| Whakatau Ratonga | 600 : 1 (Typ.) (Transmissive) |
| Whakaatu Tae | 262K (6-bit) |
| Tae Tae | 45% NTSC (CIE1931) |
| Wā Whakautu | 3/7 (Typ.)(Tr/Td) |
| Tirohia te Angle | 45/45/20/45 (Typ.)(CR≥10) (L/R/U/D) |
| Tirohanga Whakahaere | 6 o'clock |
| Te tae matomato Kakano | Wx:0.313; Wy:0.329 |
| Te Maama White | 1.25/1.60 (Max.)(5/13 points) |
| Maama te Maama | N |
N116BGE-EB2 Hangarau Hangarau
| Putanga Poutū | 60Hz |
|---|---|
| Whakaaro Whakamuri | No |
| Te Whakamahinga Mana Utu | 2.65W (Max.) |
N116BGE-EB2 Pūnaha Ataata
| Tumuaki Poko | Edge light type |
|---|---|
| Momo Momo | WLED |
| Te wa mo te rama | 15K(Min.) (Hours) |
| Penehi Rama | 26/29/30V (Min./Typ./Max.) |
| Rama i teianei | 47mA (Typ.) |
| Whakaoho Whakaoho Rama | 1.36/1.41W (Typ./Max.) |
| Momo Atanga | Included in panel signal interface |
| Papa Pouaka Papa | 1.9W (Max.) |
N116BGE-EB2 Atanga Waitohu
| Waitohu Waitohu | eDP |
|---|---|
| Pato Waitohu | eDP (1 Lane) |
| Putanga o te Whakauru mo te Paewhiri | 3.3V (Typ.) |
| Te Whakauru Naianei mo te Paewhiri | 220/247mA (Typ./Max.) |
| Whakaoranga Mana Whakahaere | 0.75W (Max.) |
| Momo Atanga | Connector |
| Atanga Waitohu | I-PEX - 20455-030E-12, Pitch:0.5 mm, Pin:30 pins |