Aronga
Tauwhāiti
N150X1-L02
N150X1-L02 Mōhiohio Taketake
| Tauira tauira | N150X1-L02 |
|---|---|
| Pae Waitohu | CMO |
| Tuhinga | a-Si TFT-LCD ,15.0 inch, 1024×768 |
| Momo Raraunga | a-Si TFT-LCD |
| N150X1-L02 Utu | Tono Tono me te Waa Whakahaere |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
N150X1-L02 Ngā Hangarau Hangarau
| Whakatau Whakamutunga | 1024(RGB)×768 (XGA) |
|---|---|
| Pihikete Pika | RGB Vertical Stripe |
| Pihanga Pika | 85 PPI |
| Whakaaro Ratonga | 4:3 (H:V) |
| Factor Puka | Flat Rectangle Display |
| Poutoro Poto | 0.099×0.297 mm (H×V) |
| Pika Pihanga | 0.297×0.297 mm (H×V) |
| Taumaha | 590/605g (Typ./Max.) |
| Mata | Antiglare (Haze 40%), Hard coating (2H), Reflection 1.8% (Max.) |
| Area Mahinga | 304.1×228.1 mm (H×V) |
| Bezel Area | 307.8×231.6 mm (H×V) |
| Rautaki Whakahuahua | 317.3×242 mm (H×V) |
| Whakaaturanga Whakahuahua | 6.7±0.3 mm |
| Hanga Hanga | Wedge (PCBA Bent, Depth ≥5.2mm) |
| Horo me nga Poaka | Side mounting holes (8-M2) on left, right bezel |
| Nga Whenua Whenua ranei | Landscape type |
| Pae Tae | Without |
N150X1-L02 Ngā Āhuahira Arotahi
| Whakaatu Aratau | TN, Normally White, Transmissive |
|---|---|
| Maama | 200 cd/m² (Typ.) |
| Whakatau Ratonga | 250 : 1 (Typ.) (Transmissive) |
| Whakaatu Tae | 262K (6-bit) |
| Tae Tae | 60% NTSC (CIE1931) |
| Wā Whakautu | 6.0/17.0 (Typ.)(Tr/Td) |
| Tirohia te Angle | 45/45/15/35 (Typ.)(CR≥10) (L/R/U/D) |
| Te tae matomato Kakano | Wx:0.313; Wy:0.329 |
| Te Maama White | 1.43 (Max.)(5 points) |
| Maama te Maama | N |
N150X1-L02 Hangarau Hangarau
| Putanga Poutū | 60Hz |
|---|---|
| Whakaaro Whakamuri | No |
N150X1-L02 Pūnaha Ataata
| Tumuaki Poko | Edge light type |
|---|---|
| Momo Momo | CCFL |
| He nui te raima | 1 pcs |
| Hanga Hangaira | Straight |
| Te wa mo te rama | 15K(Typ.) (Hours) |
| Penehi Rama | 680±68V |
| Rama i teianei | 2.0/6.0/6.5mA (Min./Typ./Max.) |
| Nga Mahinga Mahi Paerewa | 60±20KHz |
| Aratau Whakaoho Maama | 1150/1500V (Max.)(Ta=+25/0℃) |
| Whakaoho Whakaoho Rama | 4.08W (Typ.) |
| Momo Atanga | Connector |
| Papa Pouaka Papa | No |
N150X1-L02 Atanga Waitohu
| Waitohu Waitohu | LVDS |
|---|---|
| Pato Waitohu | LVDS (1 ch, 6-bit) |
| Putanga o te Whakauru mo te Paewhiri | 3.3V (Typ.) |
| Te Whakauru Naianei mo te Paewhiri | 600mA (Typ.) |
| Momo Atanga | Connector |
| Atanga Waitohu | JAE - FI-SEB20P-HF10, Pitch:1.25 mm, Pin:20 pins |