Aronga
Tauwhāiti
NT156WHM-T00
NT156WHM-T00 Mōhiohio Taketake
| Tauira tauira | NT156WHM-T00 |
|---|---|
| Pae Waitohu | BOE |
| Tuhinga | a-Si TFT-LCD ,15.6 inch, 1366×768 |
| Momo Raraunga | a-Si TFT-LCD |
| NT156WHM-T00 Utu | Tono Tono me te Waa Whakahaere |
| Tetahi Ingoa | BOE06C2 |
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
NT156WHM-T00 Ngā Āhuahira Arotahi
| Tetahi Ingoa | BOE06C2 |
|---|---|
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
| Te whakamarama | 200 cd/m² (Typ.) |
| Whakatau Ratonga | 500:1 (Typ.) (Transmissive) |
| Tuhinga pai i | 6 o'clock |
| Whakautu Tere | 12 (Typ.)(Tr+Td) ms |
| Tirohia te Angle | 45/45/20/40 (Typ.)(CR≥10) |
| Aratau Mahi | TN, Normally White, Transmissive |
| Tuhinga o mua | Wx:0.313; Wy:0.329 |
| Tae Tautoko | 262K (6-bit) |
| Taonga | 45% NTSC (CIE1931) |
| Te Maama White | 1.25/1.54 (Max.)(5/13 points) |
NT156WHM-T00 Ngā Hangarau Hangarau
| Tetahi Ingoa | BOE06C2 |
|---|---|
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
| Te whakamarama | 200 cd/m² (Typ.) |
| Whakatau Ratonga | 500:1 (Typ.) (Transmissive) |
| Tuhinga pai i | 6 o'clock |
| Whakautu Tere | 12 (Typ.)(Tr+Td) ms |
| Tirohia te Angle | 45/45/20/40 (Typ.)(CR≥10) |
| Aratau Mahi | TN, Normally White, Transmissive |
| Tuhinga o mua | Wx:0.313; Wy:0.329 |
| Tae Tautoko | 262K (6-bit) |
| Taonga | 45% NTSC (CIE1931) |
| Te Maama White | 1.25/1.54 (Max.)(5/13 points) |
| Tau o nga Pika | 1366(RGB)×768, WXGA |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.084×0.252 mm |
| Pihanga Pitch (W × H) | 0.252×0.252 mm |
| Tirohanga Mahinga | 344.232(W)×193.536(H) mm |
| Whakakototanga Dim. | 359.5(W)×223.8(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 3.8 (Max.) mm |
| Hanga Hanga | Flat (PCBA Flat, Depth 3.4~4.0mm) |
| Whakatakotoranga | Landscape type |
| Ratio Whakaaro (W: H) | 16:9 |
| Kaiwhakahaere TP | With touch controller |
| Atanga TP | USB |
| Ngā Piro Tae | 10 points |
| TP Hangarau | PCAP, On-Cell |
| Whakatika | Face mounting holes (8 pcs) on up, down slugs |
| Mass | 370g (Max.) |
| Mata | Hard coating (3H) |
NT156WHM-T00 Hangarau Hangarau
| Tetahi Ingoa | BOE06C2 |
|---|---|
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
| Te whakamarama | 200 cd/m² (Typ.) |
| Whakatau Ratonga | 500:1 (Typ.) (Transmissive) |
| Tuhinga pai i | 6 o'clock |
| Whakautu Tere | 12 (Typ.)(Tr+Td) ms |
| Tirohia te Angle | 45/45/20/40 (Typ.)(CR≥10) |
| Aratau Mahi | TN, Normally White, Transmissive |
| Tuhinga o mua | Wx:0.313; Wy:0.329 |
| Tae Tautoko | 262K (6-bit) |
| Taonga | 45% NTSC (CIE1931) |
| Te Maama White | 1.25/1.54 (Max.)(5/13 points) |
| Tau o nga Pika | 1366(RGB)×768, WXGA |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.084×0.252 mm |
| Pihanga Pitch (W × H) | 0.252×0.252 mm |
| Tirohanga Mahinga | 344.232(W)×193.536(H) mm |
| Whakakototanga Dim. | 359.5(W)×223.8(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 3.8 (Max.) mm |
| Hanga Hanga | Flat (PCBA Flat, Depth 3.4~4.0mm) |
| Whakatakotoranga | Landscape type |
| Ratio Whakaaro (W: H) | 16:9 |
| Kaiwhakahaere TP | With touch controller |
| Atanga TP | USB |
| Ngā Piro Tae | 10 points |
| TP Hangarau | PCAP, On-Cell |
| Whakatika | Face mounting holes (8 pcs) on up, down slugs |
| Mass | 370g (Max.) |
| Mata | Hard coating (3H) |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Te Whakataunga Moni | 3.6W (Max.) |
NT156WHM-T00 Atanga Waitohu
| Tetahi Ingoa | BOE06C2 |
|---|---|
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
| Te whakamarama | 200 cd/m² (Typ.) |
| Whakatau Ratonga | 500:1 (Typ.) (Transmissive) |
| Tuhinga pai i | 6 o'clock |
| Whakautu Tere | 12 (Typ.)(Tr+Td) ms |
| Tirohia te Angle | 45/45/20/40 (Typ.)(CR≥10) |
| Aratau Mahi | TN, Normally White, Transmissive |
| Tuhinga o mua | Wx:0.313; Wy:0.329 |
| Tae Tautoko | 262K (6-bit) |
| Taonga | 45% NTSC (CIE1931) |
| Te Maama White | 1.25/1.54 (Max.)(5/13 points) |
| Tau o nga Pika | 1366(RGB)×768, WXGA |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.084×0.252 mm |
| Pihanga Pitch (W × H) | 0.252×0.252 mm |
| Tirohanga Mahinga | 344.232(W)×193.536(H) mm |
| Whakakototanga Dim. | 359.5(W)×223.8(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 3.8 (Max.) mm |
| Hanga Hanga | Flat (PCBA Flat, Depth 3.4~4.0mm) |
| Whakatakotoranga | Landscape type |
| Ratio Whakaaro (W: H) | 16:9 |
| Kaiwhakahaere TP | With touch controller |
| Atanga TP | USB |
| Ngā Piro Tae | 10 points |
| TP Hangarau | PCAP, On-Cell |
| Whakatika | Face mounting holes (8 pcs) on up, down slugs |
| Mass | 370g (Max.) |
| Mata | Hard coating (3H) |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Te Whakataunga Moni | 3.6W (Max.) |
| Kei te Input o Naianei | 197mA (Typ.) |
| Putanga Whakauru | 3.3V (Typ.) |
| Te kai | 0.65/1.0W (Typ./Max.) |
| Atanga Waitohu | eDP (2 Lanes) |
| Tūnga | |
| Momo Momo | Connector |
| Pihanga Whakawhiti | Pins |
| Te nui | Pin Assignment |
NT156WHM-T00 Pūnaha Ataata
| Tetahi Ingoa | BOE06C2 |
|---|---|
| OP Temperature | 0 ~ 50 °C |
| ST Temperature | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Ngā āhuatanga | |
| Nga korero | eDP1.2 |
| Te whakamarama | 200 cd/m² (Typ.) |
| Whakatau Ratonga | 500:1 (Typ.) (Transmissive) |
| Tuhinga pai i | 6 o'clock |
| Whakautu Tere | 12 (Typ.)(Tr+Td) ms |
| Tirohia te Angle | 45/45/20/40 (Typ.)(CR≥10) |
| Aratau Mahi | TN, Normally White, Transmissive |
| Tuhinga o mua | Wx:0.313; Wy:0.329 |
| Tae Tautoko | 262K (6-bit) |
| Taonga | 45% NTSC (CIE1931) |
| Te Maama White | 1.25/1.54 (Max.)(5/13 points) |
| Tau o nga Pika | 1366(RGB)×768, WXGA |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.084×0.252 mm |
| Pihanga Pitch (W × H) | 0.252×0.252 mm |
| Tirohanga Mahinga | 344.232(W)×193.536(H) mm |
| Whakakototanga Dim. | 359.5(W)×223.8(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 3.8 (Max.) mm |
| Hanga Hanga | Flat (PCBA Flat, Depth 3.4~4.0mm) |
| Whakatakotoranga | Landscape type |
| Ratio Whakaaro (W: H) | 16:9 |
| Kaiwhakahaere TP | With touch controller |
| Atanga TP | USB |
| Ngā Piro Tae | 10 points |
| TP Hangarau | PCAP, On-Cell |
| Whakatika | Face mounting holes (8 pcs) on up, down slugs |
| Mass | 370g (Max.) |
| Mata | Hard coating (3H) |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Te Whakataunga Moni | 3.6W (Max.) |
| Kei te Input o Naianei | - |
| Putanga Whakauru | 5.5/12.0/21.0V (Min./Typ./Max.) |
| Te kai | 2.6W (Max.) |
| Atanga Waitohu | eDP (2 Lanes) |
| Tūnga | - |
| Momo Momo | WLED |
| Pihanga Whakawhiti | Pins |
| Te nui | 9S4P |
| Whakawhiti | - |
| Hanga Hangaira | 4 strings |
| Life Pamp | 15K(Min.) (Hours) |
| Aratau Arataki | With LED Driver |