Aronga
Tauwhāiti
TM035HBZT00
TM035HBZT00 Mōhiohio Taketake
| Tauira tauira | TM035HBZT00 |
|---|---|
| Pae Waitohu | TIANMA |
| Tuhinga | a-Si TFT-LCD ,3.5 inch, 240×320 |
| Momo Raraunga | a-Si TFT-LCD |
| TM035HBZT00 Utu | Tono Tono me te Waa Whakahaere |
| Tetahi Ingoa | - |
| OP Temperature | -20 ~ 60 °C |
| ST Temperature | -30 ~ 70 °C |
| Taumata Whakaoho | - |
TM035HBZT00 Ngā Āhuahira Arotahi
| Tetahi Ingoa | - |
|---|---|
| OP Temperature | -20 ~ 60 °C |
| ST Temperature | -30 ~ 70 °C |
| Taumata Whakaoho | - |
| Te whakamarama | 80 cd/m² (Typ.) |
| Whakatau Ratonga | 150:1 (Typ.) (Transmissive) 2.5:1 (Typ.) (Reflective) |
| Tuhinga pai i | 6 o'clock |
| Whakautu Tere | 35 (Typ.)(Tr+Td) ms |
| Tirohia te Angle | 45/40/55/40 (Typ.)(CR≥10) |
| Aratau Mahi | TN, Normally White, Transflective |
| Tuhinga o mua | Wx:0.301; Wy:0.321 |
| Tae Tautoko | 262K (6-bit) |
| Te Tirohanga O waho | Sunlight Readable |
| Te whakawhitiwhiti | - |
| 3D Tech | - |
| Whakaaro | 5.5% (Typ.) |
TM035HBZT00 Ngā Hangarau Hangarau
| Tetahi Ingoa | - |
|---|---|
| OP Temperature | -20 ~ 60 °C |
| ST Temperature | -30 ~ 70 °C |
| Taumata Whakaoho | - |
| Te whakamarama | 80 cd/m² (Typ.) |
| Whakatau Ratonga | 150:1 (Typ.) (Transmissive) 2.5:1 (Typ.) (Reflective) |
| Tuhinga pai i | 6 o'clock |
| Whakautu Tere | 35 (Typ.)(Tr+Td) ms |
| Tirohia te Angle | 45/40/55/40 (Typ.)(CR≥10) |
| Aratau Mahi | TN, Normally White, Transflective |
| Tuhinga o mua | Wx:0.301; Wy:0.321 |
| Tae Tautoko | 262K (6-bit) |
| Te Tirohanga O waho | Sunlight Readable |
| Te whakawhitiwhiti | - |
| 3D Tech | - |
| Whakaaro | 5.5% (Typ.) |
| Tau o nga Pika | 240(RGB)×320, QVGA |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.0745×0.2235 mm |
| Pihanga Pitch (W × H) | 0.2235×0.2235 mm |
| Tirohanga Mahinga | 53.64(W)×71.52(H) mm |
| Whakakototanga Dim. | 64(W)×85(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 4.13 (Typ.) mm |
| Hanga Hanga | - |
| Whakatakotoranga | Portrait type |
| Ratio Whakaaro (W: H) | 3:4 |
| Kaiwhakahaere TP | Without touch controller |
| Atanga TP | - |
| Ngā Piro Tae | - |
| TP Hangarau | 4-wire Resistive Touch |
| Mass | TBD |
| Mata | - |
TM035HBZT00 Atanga Waitohu
| Tetahi Ingoa | - |
|---|---|
| OP Temperature | -20 ~ 60 °C |
| ST Temperature | -30 ~ 70 °C |
| Taumata Whakaoho | - |
| Te whakamarama | 80 cd/m² (Typ.) |
| Whakatau Ratonga | 150:1 (Typ.) (Transmissive) 2.5:1 (Typ.) (Reflective) |
| Tuhinga pai i | 6 o'clock |
| Whakautu Tere | 35 (Typ.)(Tr+Td) ms |
| Tirohia te Angle | 45/40/55/40 (Typ.)(CR≥10) |
| Aratau Mahi | TN, Normally White, Transflective |
| Tuhinga o mua | Wx:0.301; Wy:0.321 |
| Tae Tautoko | 262K (6-bit) |
| Te Tirohanga O waho | Sunlight Readable |
| Te whakawhitiwhiti | - |
| 3D Tech | - |
| Whakaaro | 5.5% (Typ.) |
| Tau o nga Pika | 240(RGB)×320, QVGA |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.0745×0.2235 mm |
| Pihanga Pitch (W × H) | 0.2235×0.2235 mm |
| Tirohanga Mahinga | 53.64(W)×71.52(H) mm |
| Whakakototanga Dim. | 64(W)×85(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 4.13 (Typ.) mm |
| Hanga Hanga | - |
| Whakatakotoranga | Portrait type |
| Ratio Whakaaro (W: H) | 3:4 |
| Kaiwhakahaere TP | Without touch controller |
| Atanga TP | - |
| Ngā Piro Tae | - |
| TP Hangarau | 4-wire Resistive Touch |
| Mass | TBD |
| Mata | - |
| Kei te Input o Naianei | - |
| Putanga Whakauru | 2.8V (Typ.) |
| Te kai | - |
| Atanga Waitohu | Parallel RGB (1 ch, 6-bit) + SPI |
| Tūnga | - |
| Pana | Pins |
| Te nui | Pin Assignment |
TM035HBZT00 Pūnaha Ataata
| Tetahi Ingoa | - |
|---|---|
| OP Temperature | -20 ~ 60 °C |
| ST Temperature | -30 ~ 70 °C |
| Taumata Whakaoho | - |
| Te whakamarama | 80 cd/m² (Typ.) |
| Whakatau Ratonga | 150:1 (Typ.) (Transmissive) 2.5:1 (Typ.) (Reflective) |
| Tuhinga pai i | 6 o'clock |
| Whakautu Tere | 35 (Typ.)(Tr+Td) ms |
| Tirohia te Angle | 45/40/55/40 (Typ.)(CR≥10) |
| Aratau Mahi | TN, Normally White, Transflective |
| Tuhinga o mua | Wx:0.301; Wy:0.321 |
| Tae Tautoko | 262K (6-bit) |
| Te Tirohanga O waho | Sunlight Readable |
| Te whakawhitiwhiti | - |
| 3D Tech | - |
| Whakaaro | 5.5% (Typ.) |
| Tau o nga Pika | 240(RGB)×320, QVGA |
| Whakarite | RGB Vertical Stripe |
| Poutuku Puku (W × H) | 0.0745×0.2235 mm |
| Pihanga Pitch (W × H) | 0.2235×0.2235 mm |
| Tirohanga Mahinga | 53.64(W)×71.52(H) mm |
| Whakakototanga Dim. | 64(W)×85(H) mm |
| Bezel Whakatuwhera | - |
| Te Taha Whānui | 4.13 (Typ.) mm |
| Hanga Hanga | - |
| Whakatakotoranga | Portrait type |
| Ratio Whakaaro (W: H) | 3:4 |
| Kaiwhakahaere TP | Without touch controller |
| Atanga TP | - |
| Ngā Piro Tae | - |
| TP Hangarau | 4-wire Resistive Touch |
| Mass | TBD |
| Mata | - |
| Kei te Input o Naianei | 20mA (Typ.) |
| Putanga Whakauru | 19.8V (Typ.) |
| Te kai | - |
| Atanga Waitohu | Parallel RGB (1 ch, 6-bit) + SPI |
| Tūnga | - |
| Pana | Pins |
| Te nui | 6S1P |
| Momo Momo | WLED |
| Whakawhiti | - |
| Hanga Hangaira | 1 string |
| Life Pamp | - |