Aronga
Tauwhāiti
AA121XS10
AA121XS10 Mōhiohio Taketake
| Tauira tauira | AA121XS10 |
|---|---|
| Pae Waitohu | Mitsubishi |
| Tuhinga | a-Si TFT-LCD ,12.1 inch, 1024×768 |
| Momo Raraunga | a-Si TFT-LCD |
| AA121XS10 Utu | Tono Tono me te Waa Whakahaere |
| Tae Mahi | -30 ~ 80 °C |
| Haumaru Ruinga | -30 ~ 80 °C |
AA121XS10 Ngā Hangarau Hangarau
| Whakatau Whakamutunga | 1024(RGB)×768 (XGA) |
|---|---|
| Pihikete Pika | RGB Vertical Stripe |
| Pihanga Pika | 105 PPI |
| Whakaaro Ratonga | 4:3 (H:V) |
| Factor Puka | Flat Rectangle Display |
| Poutoro Poto | 0.080×0.240 mm (H×V) |
| Pika Pihanga | 0.240×0.240 mm (H×V) |
| Taumaha | TBD |
| Mata | Antiglare, Hard coating (3H) |
| Area Mahinga | 245.76×184.32 mm (H×V) |
| Bezel Area | 249.0×187.5 mm (H×V) |
| Rautaki Whakahuahua | 260.5×203 mm (H×V) |
| Whakaaturanga Whakahuahua | 9.7/10.2 (Typ./Max.) mm |
| Horo me nga Poaka | Side mounting holes (6-M3) on left right bezel |
| Nga Whenua Whenua ranei | Landscape type |
| Pae Tae | Without |
AA121XS10 Ngā Āhuahira Arotahi
| Whakaatu Aratau | TN, Normally White, Transmissive |
|---|---|
| Maama | 1000 cd/m² (Typ.) |
| Whakatau Ratonga | 600 : 1 (Typ.) (Transmissive) |
| Whakaatu Tae | 262K/16.7M (6-bit / 6-bit + Hi-FRC) |
| Tae Tae | 40% NTSC (CIE1931) |
| Wā Whakautu | 6/19 (Typ.)(Tr/Td) |
| Tirohia te Angle | 80/80/80/60 (Typ.)(CR≥10) (L/R/U/D) |
| Tirohanga Whakahaere | 6 o'clock |
| Te tae matomato Kakano | Wx:0.313; Wy:0.329 |
| Te Maama White | 1.30 (Max.)(5 points) |
| Maama te Maama | Y |
AA121XS10 Hangarau Hangarau
| Putanga Poutū | 60Hz |
|---|---|
| Whakaaro Whakamuri | Yes (180°) |
AA121XS10 Pūnaha Ataata
| Tumuaki Poko | Edge light type |
|---|---|
| Momo Momo | WLED |
| He nui te raima | 4 strings |
| Hanga Hangaira | 4 strings |
| Te wa mo te rama | 60K(Min.) (Hours) |
| Penehi Rama | 18/23.3V (Typ./Max.) |
| Rama i teianei | 120/130mA (Typ./Max.) |
| Momo Atanga | Connector |
| Papa Pouaka Papa | No |
AA121XS10 Atanga Waitohu
| Waitohu Waitohu | LVDS |
|---|---|
| Pato Waitohu | LVDS (1 ch, 6/8-bit) |
| Putanga o te Whakauru mo te Paewhiri | 3.3V (Typ.) |
| Te Whakauru Naianei mo te Paewhiri | 320/600mA (Typ.) |
| Momo Atanga | Connector |
| Atanga Waitohu | JAE - FI-SE20P-HFE, Pitch:1.25 mm, Pin:20 pins |