Aronga
Tauwhāiti
CLAA150PB03
CLAA150PB03 Mōhiohio Taketake
| Tauira tauira | CLAA150PB03 |
|---|---|
| Pae Waitohu | CPT |
| Tuhinga | a-Si TFT-LCD ,15.0 inch, 1400×1050 |
| Momo Raraunga | a-Si TFT-LCD |
| CLAA150PB03 Utu | Tono Tono me te Waa Whakahaere |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
CLAA150PB03 Ngā Hangarau Hangarau
| Whakatau Whakamutunga | 1400(RGB)×1050 (SXGA+) |
|---|---|
| Pihikete Pika | RGB Vertical Stripe |
| Pihanga Pika | 116 PPI |
| Whakaaro Ratonga | 4:3 (H:V) |
| Factor Puka | Flat Rectangle Display |
| Poutoro Poto | 0.0725×0.2175 mm (H×V) |
| Pika Pihanga | 0.2175×0.2175 mm (H×V) |
| Taumaha | 560g (Typ.) |
| Mata | Antiglare (Haze 12%), Hard coating (3H) |
| Area Mahinga | 304.5×228.375 mm (H×V) |
| Bezel Area | 307.7×231.6 mm (H×V) |
| Rautaki Whakahuahua | 317.3×242 mm (H×V) |
| Whakaaturanga Whakahuahua | 5.7±0.3 mm |
| Hanga Hanga | Wedge (PCBA Bent, Depth ≥5.2mm) |
| Horo me nga Poaka | Side mounting holes (8-M2) on left, right bezel |
| Nga Whenua Whenua ranei | Landscape type |
| Pae Tae | Without |
CLAA150PB03 Ngā Āhuahira Arotahi
| Whakaatu Aratau | TN, Normally White, Transmissive |
|---|---|
| Maama | 200 cd/m² (Typ.) |
| Whakatau Ratonga | 350 : 1 (Typ.) (Transmissive) |
| Whakaatu Tae | 262K (6-bit) |
| Wā Whakautu | 7/18 (Typ.)(Tr/Td) |
| Tirohia te Angle | 40/40/20/40 (Typ.)(CR≥10) (L/R/U/D) |
| Tirohanga Whakahaere | 6 o'clock |
| Te tae matomato Kakano | Wx:0.313; Wy:0.329 |
| Te Maama White | 1.30 (Max.)(5 points) |
| Maama te Maama | N |
CLAA150PB03 Hangarau Hangarau
| Putanga Poutū | 60Hz |
|---|---|
| Whakaaro Whakamuri | No |
| Te Whakamahinga Mana Utu | 7.05W (Typ.) |
CLAA150PB03 Pūnaha Ataata
| Tumuaki Poko | Edge light type (Bottom side) |
|---|---|
| Momo Momo | CCFL |
| He nui te raima | 1 pcs |
| Hanga Hangaira | Straight |
| Te wa mo te rama | 15K(Min.) (Hours) |
| Penehi Rama | 680±68V |
| Rama i teianei | 3.0/6.0/6.5mA (Min./Typ./Max.) |
| Nga Mahinga Mahi Paerewa | 50/60KHz (Min./Max.) |
| Aratau Whakaoho Maama | 1370/1560V (Max.)(Ta=+25/0℃) |
| Momo Atanga | Connector |
| Papa Pouaka Papa | No |
CLAA150PB03 Atanga Waitohu
| Waitohu Waitohu | LVDS |
|---|---|
| Pato Waitohu | LVDS (2 ch, 6-bit) |
| Putanga o te Whakauru mo te Paewhiri | 3.3V (Typ.) |
| Te Whakauru Naianei mo te Paewhiri | 900/1100mA (Typ./Max.) |
| Momo Atanga | Connector |
| Atanga Waitohu | STARCONN - 093B30-B000RA, Pitch:1.0 mm, Pin:30 pins |