Aronga
Tauwhāiti
XR1010010
XR1010010 Mōhiohio Taketake
| Tauira tauira | XR1010010 |
|---|---|
| Pae Waitohu | BOE |
| Tuhinga | a-Si TFT-LCD ,10.1 inch, 1024×600 |
| Momo Raraunga | a-Si TFT-LCD |
| XR1010010 Utu | Tono Tono me te Waa Whakahaere |
| Ingoa Brand | |
| Ingoa tauira | XR1010010 |
| Aratau Tauira | LQ101W1LG03 |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
XR1010010 Ngā Hangarau Hangarau
| Ingoa Brand | |
|---|---|
| Ingoa tauira | XR1010010 |
| Aratau Tauira | LQ101W1LG03 |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Tau Pika | 1024(RGB)×600, WSVGA |
| Hōputu Pika | RGB Vertical Stripe |
| Poutoro Poto (H × V) | 0.0725×0.2175 mm |
| Pihanga Pitch (H × V) | 0.2175×0.2088 mm |
| Whakaaturanga Area (H × V) | 222.72×125.28 mm |
| Bezel Whakatuwhera (H × V) | - |
| Whakakitenga Whānui (H × V) | 235×143 mm |
| Te Taha Whānui | 5.2 (Max.) mm |
| Hanga Hanga | - |
| Whakaaro Ratio (H: V) | 16:9 |
| Whakatakotoranga | Landscape type |
| Mass | - |
| Ko te Tae Rangahau | - |
| Maimoatanga Mata | Antiglare, Hard coating (3H) |
| Horo me nga Poaka | Side mounting holes (4-M2) on left, right bezel |
XR1010010 Ngā Āhuahira Arotahi
| Ingoa Brand | |
|---|---|
| Ingoa tauira | XR1010010 |
| Aratau Tauira | LQ101W1LG03 |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Tau Pika | 1024(RGB)×600, WSVGA |
| Hōputu Pika | RGB Vertical Stripe |
| Poutoro Poto (H × V) | 0.0725×0.2175 mm |
| Pihanga Pitch (H × V) | 0.2175×0.2088 mm |
| Whakaaturanga Area (H × V) | 222.72×125.28 mm |
| Bezel Whakatuwhera (H × V) | - |
| Whakakitenga Whānui (H × V) | 235×143 mm |
| Te Taha Whānui | 5.2 (Max.) mm |
| Hanga Hanga | - |
| Whakaaro Ratio (H: V) | 16:9 |
| Whakatakotoranga | Landscape type |
| Mass | - |
| Ko te Tae Rangahau | - |
| Maimoatanga Mata | Antiglare, Hard coating (3H) |
| Horo me nga Poaka | Side mounting holes (4-M2) on left, right bezel |
| Te whakamarama | 200 cd/m² (Typ.) |
| Mahinga Mahi | TN, Normally White, Transmissive |
| Whakatau Ratonga | 500:1 (Typ.) (Transmissive) |
| Taonga | 45% NTSC (CIE1931) |
| Tae Tautoko | 262K/16.7M (6-bit / 6-bit + Dithering) |
| Whakaaetanga Tae | Wx:0.305; Wy:0.325 |
XR1010010 Hangarau Hangarau
| Ingoa Brand | |
|---|---|
| Ingoa tauira | XR1010010 |
| Aratau Tauira | LQ101W1LG03 |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Tau Pika | 1024(RGB)×600, WSVGA |
| Hōputu Pika | RGB Vertical Stripe |
| Poutoro Poto (H × V) | 0.0725×0.2175 mm |
| Pihanga Pitch (H × V) | 0.2175×0.2088 mm |
| Whakaaturanga Area (H × V) | 222.72×125.28 mm |
| Bezel Whakatuwhera (H × V) | - |
| Whakakitenga Whānui (H × V) | 235×143 mm |
| Te Taha Whānui | 5.2 (Max.) mm |
| Hanga Hanga | - |
| Whakaaro Ratio (H: V) | 16:9 |
| Whakatakotoranga | Landscape type |
| Mass | - |
| Ko te Tae Rangahau | - |
| Maimoatanga Mata | Antiglare, Hard coating (3H) |
| Horo me nga Poaka | Side mounting holes (4-M2) on left, right bezel |
| Te whakamarama | 200 cd/m² (Typ.) |
| Mahinga Mahi | TN, Normally White, Transmissive |
| Whakatau Ratonga | 500:1 (Typ.) (Transmissive) |
| Taonga | 45% NTSC (CIE1931) |
| Tae Tautoko | 262K/16.7M (6-bit / 6-bit + Dithering) |
| Whakaaetanga Tae | Wx:0.305; Wy:0.325 |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
XR1010010 Pūnaha Ataata
| Ingoa Brand | |
|---|---|
| Ingoa tauira | XR1010010 |
| Aratau Tauira | LQ101W1LG03 |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Tau Pika | 1024(RGB)×600, WSVGA |
| Hōputu Pika | RGB Vertical Stripe |
| Poutoro Poto (H × V) | 0.0725×0.2175 mm |
| Pihanga Pitch (H × V) | 0.2175×0.2088 mm |
| Whakaaturanga Area (H × V) | 222.72×125.28 mm |
| Bezel Whakatuwhera (H × V) | - |
| Whakakitenga Whānui (H × V) | 235×143 mm |
| Te Taha Whānui | 5.2 (Max.) mm |
| Hanga Hanga | - |
| Whakaaro Ratio (H: V) | 16:9 |
| Whakatakotoranga | Landscape type |
| Mass | - |
| Ko te Tae Rangahau | - |
| Maimoatanga Mata | Antiglare, Hard coating (3H) |
| Horo me nga Poaka | Side mounting holes (4-M2) on left, right bezel |
| Te whakamarama | 200 cd/m² (Typ.) |
| Mahinga Mahi | TN, Normally White, Transmissive |
| Whakatau Ratonga | 500:1 (Typ.) (Transmissive) |
| Taonga | 45% NTSC (CIE1931) |
| Tae Tautoko | 262K/16.7M (6-bit / 6-bit + Dithering) |
| Whakaaetanga Tae | Wx:0.305; Wy:0.325 |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Tūnga | Edge light type |
| Te ora (haora) | 37K(Typ.) |
| Te nui | 4 strings |
| Hanga | 4 strings |
| Te whakakapi | - |
| Aratau WLED Driver State | With LED Driver |
| Momo Momo | Included in panel signal interface |
| Waehere Atanga | - |
| Putanga Whakauru | 4/12V (Min./Max.) |
| Kei te Input o Naianei | 2800/305mA (Typ./Max.) |
| Whakaoranga Mana | 1.64W (Typ.) |
XR1010010 Atanga Waitohu
| Ingoa Brand | STARCONN |
|---|---|
| Ingoa tauira | XR1010010 |
| Aratau Tauira | LQ101W1LG03 |
| Tae Mahi | 0 ~ 50 °C |
| Haumaru Ruinga | -20 ~ 60 °C |
| Taumata Whakaoho | - |
| Tau Pika | 1024(RGB)×600, WSVGA |
| Hōputu Pika | RGB Vertical Stripe |
| Poutoro Poto (H × V) | 0.0725×0.2175 mm |
| Pihanga Pitch (H × V) | 0.2175×0.2088 mm |
| Whakaaturanga Area (H × V) | 222.72×125.28 mm |
| Bezel Whakatuwhera (H × V) | - |
| Whakakitenga Whānui (H × V) | 235×143 mm |
| Te Taha Whānui | 5.2 (Max.) mm |
| Hanga Hanga | - |
| Whakaaro Ratio (H: V) | 16:9 |
| Whakatakotoranga | Landscape type |
| Mass | - |
| Ko te Tae Rangahau | - |
| Maimoatanga Mata | Antiglare, Hard coating (3H) |
| Horo me nga Poaka | Side mounting holes (4-M2) on left, right bezel |
| Te whakamarama | 200 cd/m² (Typ.) |
| Mahinga Mahi | TN, Normally White, Transmissive |
| Whakatau Ratonga | 500:1 (Typ.) (Transmissive) |
| Taonga | 45% NTSC (CIE1931) |
| Tae Tautoko | 262K/16.7M (6-bit / 6-bit + Dithering) |
| Whakaaetanga Tae | Wx:0.305; Wy:0.325 |
| Whakahou Whakatau | 60Hz |
| Whakaaro Whakamuri | No |
| Tūnga | Edge light type |
| Te ora (haora) | 37K(Typ.) |
| Te nui | 1 pcs |
| Hanga | 4 strings |
| Te whakakapi | - |
| Aratau WLED Driver State | With LED Driver |
| Momo Momo | Connector |
| Waehere Atanga | - |
| Putanga Whakauru | 3.3V (Typ.) |
| Kei te Input o Naianei | 0.22A (Typ.) |
| Whakaoranga Mana | 0.5/0.73W (Typ./Max.) |
| Momo Waitohu | LVDS (1 ch, 6/8-bit) |
| Tohu | 40 pins |
| Pihanga Whakawhiti | 0.5 mm |
| Pin Whirihoranga |